Many people have a headache about the noise when stepping on new flooring after installation. To completely solve this problem, it is necessary to reinstall it, which is a very laborious task that no one likes. So before installation, it is important to pay attention to the method to avoid making noise when stepping on the floor as much as possible.
Firstly, it is necessary to tighten the earthworm. Before installing the earthworm, a 2mm electric hammer drill should be used to drill holes, so the wooden tenon needs to be compacted with a square wooden tenon of at least 18-20mm to be effective. It cannot be easily drilled down, otherwise it will move as soon as the wooden tenon dries and shrinks in a few days. In some areas, the ground level may differ by several centimeters. At this time, the carpenter will place some knife shaped wooden plugs or plywood under the earthworm to ensure its level. It should be noted that when the cushion is relatively high, the earth worms need to be broken and fixed to each other to prevent them from shaking and swinging left and right, in order to ensure that the earth worms are flat and firm. Leave at least one centimeter of floor contraction joints around the wall to avoid climate change or floor moisture expansion and arching.